Case IH Vestrum 130 –
The Case IH Vestrum 130 – is a utility tractor from Case IH with a 130 HP, 4 Cyl, 4.5L FPT NEF engine, 111 HP PTO, 4WD drive, 5600 kg rear lift.
- Engine: 130 HP, 4 Cyl, 4.5L FPT NEF
- PTO: 111 HP
- Drive: 4WD
- Transmission: ActiveDrive 8 Powershift / CVXDrive CVT
- Lift: 5600 kg rear
Efficient FPT Stage V engine with strong torque.
Complex emissions and electronic systems.
Values are compiled from manufacturer and dealer data; confirm final figures before purchase.
Quick specifications
Key takeaways
- Efficient FPT Stage V engine with strong torque.
- Rated power of 130 HP @ 2200 RPM (max 140 HP) with 630 Nm @ 1300 RPM of torque.
- Rear lift capacity of 5600 kg for mounted implements.
- ActiveDrive 8 Powershift / CVXDrive CVT transmission with 4WD drive.
- Watch-out: complex emissions and electronic systems.
What the Case IH Vestrum 130 – offers
The Case IH Vestrum 130 – is a utility tractor from Case IH, built around a 130 HP, 4 Cyl, 4.5L FPT NEF engine. It drives through a ActiveDrive 8 Powershift / CVXDrive CVT transmission, delivers 111 HP at the PTO, lifts up to 5600 kg on the rear hitch. That configuration places it in large-acreage tillage, haulage and demanding PTO work. Tractor Arena rates it 8.4/10 overall, scored across engine, transmission, PTO, hydraulics and operator comfort.
Category score breakdown
These are TractorArena editorial comparison scores, not manufacturer or user review ratings.
Reasons to buy and points to check
Reasons to buy
- Efficient FPT Stage V engine with strong torque.
- Smooth CVXDrive CVT transmission option.
- Powerful closed‑center load‑sensing hydraulics.
- Premium AFS Pro operator comfort and electronics.
Reasons to consider
- Complex emissions and electronic systems.
- Higher potential maintenance cost.
- Heavier than basic utility tractors.
Best use cases
Well suited to
- Large-acreage primary tillage
- High-draft and high-HP PTO work
- Long-distance heavy haulage
Less ideal for
- Small holdings and tight rows
- Buyers needing a low purchase price
Case IH Vestrum 130 – full specifications
Grouped technical data. Confirm final configuration, tyres and market-specific data with the manufacturer or local dealer.
General Identification
| Brand | Case IH |
| Model Name | Vestrum 130 |
| Series | Vestrum Series |
| Configuration | Agricultural |
| Tractor Class | Utility Tractor |
| Drive Configuration | 4WD |
Engine
130 HP @ 2200 RPM (max 140 HP)| Engine Manufacturer | FPT Industrial |
| Engine Model | NEF / F28 |
| Engine Type | Diesel, Inline Turbocharged |
| Number of Cylinders | 4 |
| Engine Displacement | 4500 cc |
| Aspiration | Turbocharged with intercooler |
| Fuel System | Common Rail Direct Injection |
| Injection Pump | High Pressure Common Rail |
| Rated Engine Speed | 2200 RPM |
| Maximum Engine Power | 130 HP @ 2200 RPM (max 140 HP) |
| Maximum Torque | 630 Nm @ 1300 RPM |
| Torque Rise | 41% |
| Governing Type | Electronic |
| Cooling Fan | Engine Driven, viscous |
| Air Intake System | Dry air cleaner |
| Exhaust Orientation | Vertical |
| Emission Standard | EU Stage V / Tier 4 Final (Hi‑eSCR2) |
Power Output
111 HP| Engine Gross Power | 130 HP |
| PTO Power | 111 HP |
| Drawbar Power | ~90–100 HP (estimated) |
| Hydraulic Power Loss | ~10–12% |
Brake System
| Brake Type | Hydraulic wet disc |
| Actuation | Independent hydraulic |
| Parking Brake | Independent mechanical |
| Brake Cooling | Oil bath |
PTO (Power Take-Off)
111 HP| PTO Type | Independent electro‑hydraulic |
| PTO Engagement | Electro‑hydraulic wet disc |
| PTO Speed | 540 / 540E / 1000 RPM |
| PTO Shaft | 1‑3/8" 6‑Spline / 21‑Spline |
| PTO Direction | Clockwise |
| Ground Speed PTO | Optional |
Hydraulic System
5600 kg rear| Hydraulic Type | Closed center load sensing |
| Hydraulic Pump | Axial piston variable displacement |
| Max Hydraulic Pressure | 200 bar |
| Lifting Capacity | 5600 kg rear |
| Lift Control | EDC electronic draft + position |
| 3-Point Hitch | Yes |
| Hitch Category | Category 2 |
| Lower Link Ends | Ball type |
| Auxiliary Valve | 4 rear + 2 mid |
| Response Control | Proportional electrical |
Fuel, Fluids & Capacities
180 L| Fuel Tank | 180 L |
| Engine Oil | ~12 L |
| Transmission Oil | ~50 L |
| Hydraulic Oil | Shared with transmission |
| Coolant | ~20 L |
Transmission & Drivetrain
ActiveDrive 8 Powershift / CVXDrive CVT| Clutch Type | Wet Multi‑Disc |
| Transmission Type | ActiveDrive 8 Powershift / CVXDrive CVT |
| Gearbox Configuration | 24F × 24R |
| Forward Gears | 24 |
| Reverse Gears | 24 |
| Forward Speed Range | Up to 40 km/h |
| Reverse Speed Range | Up to 40 km/h |
| Final Drive | Inboard planetary |
| Differential Lock | Electro‑hydraulic |
Tyres & Axle Data
520/70R42| Tyre Type | Agricultural R1W |
| Front Tyres | 420/70R24 |
| Rear Tyres | 520/70R42 |
| Front Axle | Class 1.75 suspended (optional) |
| Rear Axle | Flange half shaft |
| Track Width (Front) | Adjustable |
| Track Width (Rear) | Adjustable |
Electrical & Electronics
| Electrical System | 12V |
| Alternator Output | 120A+ (estimated) |
| Starter Motor | Electric |
| Instrument Cluster | Digital / AFS Pro 700+ |
| Warning Indicators | Oil, temperature, charging, DEF |
Steering System
| Steering Type | Hydrostatic Power Steering |
| Steering Gear | Load sensing |
| Turning Radius (with brakes) | ~4.5 m (estimated) |
| Steering Column | Tilt & telescopic adjustable |
Operator Environment
| Seat | Air suspension premium |
| Suspension Seat | Yes |
| ROPS | Integrated cab |
| Footstep | Anti‑slip |
| Control Layout | MultiControl armrest |
Implement Compatibility Matrix
| MB Plough | Yes |
| Disc Harrow | Yes |
| Cultivator | Yes |
| Rotavator (5–6 ft) | Yes |
| Thresher | Yes |
| Baler | Yes |
| Trailer (Hydraulic) | Yes |
Dimensions & Weight
5850 kg| Wheelbase | 2492 mm |
| Overall Length | 4784 mm |
| Overall Height | ~3200 mm |
| Overall Width | ~2400 mm |
| Minimum Ground Clearance | ~500 mm |
| Unladen Weight | 5850 kg |
| Max Permissible Weight | ~10000 kg |
Case IH Vestrum 130 – comparisons
Line the Case IH Vestrum 130 – up against similar tractors by power, transmission and lift capacity.
Case IH Vestrum 130 – vs John Deere 6M 105 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Case IH Vestrum 130 – vs Kubota L3970 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Case IH Vestrum 130 – vs John Deere 6M 125 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Case IH Vestrum 130 – vs Kubota L5070 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Case IH Vestrum 130 – vs Kubota L4270 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Case IH Vestrum 130 – vs John Deere 6M 130 – Specifications
- Power & PTO
- Hydraulics & lift
- Transmission
Similar tractors to consider
Case IH Vestrum 130 – FAQ
What is the engine setup of the Case IH Vestrum 130 – Specifications?
The listed engine highlight is 130 HP, 4 Cyl, 4.5L FPT NEF. Use the full Engine specification section below to check displacement, torque, aspiration, fuel system, and rated RPM.
Is the Case IH Vestrum 130 – Specifications suitable for PTO implements?
The listed PTO highlight is 111 HP, 540/540E/1000 RPM. Before using a rotavator, baler, thresher, pump, or other PTO machine, match PTO speed, PTO power, shaft type, and implement requirement.
What should I check before choosing this tractor?
Check engine power, drive configuration, transmission, hydraulic lifting capacity, PTO compatibility, tyre size, operating weight, and service support in your area.
Are these specifications useful for comparison?
Yes. This page groups the important points into key facts, buyer guidance, ratings, pros and cons, and full specifications so you can compare it with similar tractors more easily.
How much power does the Case IH Vestrum 130 – make?
It is rated at 130 HP @ 2200 RPM (max 140 HP), with peak torque of 630 Nm @ 1300 RPM. See the Engine and Power Output sections for the full figures.
What is the lift capacity of the Case IH Vestrum 130 –?
Rated rear hydraulic lift capacity is 5600 kg rear. Match this to the weight of any mounted implement you plan to run.
What transmission does the Case IH Vestrum 130 – use?
It uses a ActiveDrive 8 Powershift / CVXDrive CVT transmission in a 4WD drive layout.
What is the fuel tank capacity of the Case IH Vestrum 130 –?
The fuel tank holds 180 L, which together with engine load determines working hours between refuelling.
About this data
Specifications on this page are compiled by the Tractor Arena editorial team from manufacturer brochures, operator manuals and dealer data sheets, then organised into a consistent structure so models can be compared like-for-like. Category scores reflect our own weighting of engine, transmission, PTO, hydraulic and operator factors for this tractor class and are not manufacturer ratings.
- Manufacturer brochure/manual checked
- Dealer data checked
- Editorial review
- Verify before purchase
Specifications may vary by market, tyre configuration, transmission option and model year. Always verify with the manufacturer or local dealer before purchase.